Happy New Year and welcome to my epic fail of 2026. I guess you have to have one, right? This is the Ray Pinafore from Paper Theory Patterns. How about that big spot in the tummy area? There were lots of issues with this one. Let's get this started with this reality check on the Ray Pinafore for petites.
Pattern:
I thought this would be the perfect tran-seasonal garment to tool around the house and garden and even wear to pop out to the supermarket. I had craved this pattern for some time and was that the setup for disappointment? I think the pattern is really cute, especially made up in the denim. The directions were clear enough but a few of them could have been technically better IMO. I'll get into the issues as we go along. Paper Theory says, " fits close around the bust but falls loose and straight to the hem in a trapeze shape with no waist shaping." It is very snug around the upper bust and then spreads out A-line from there. There are two long slits on the sides the fall away from each other, an attractive detail. The slits and hems are at least 3 inches deep. The slits are set on that A- line so that they do not lay on top of each other like a vent. I like the look of the "spread". Two different topstitching options are suggested in the pattern. I did matching navy thread, two spools at a time. There is interesting seaming with triangle shapes under the arms. The narrow upper bust, those triangle shapes under the arms and the off set slit bands make shortening this garment difficult. It is made for someone 5'7". I am 5 feet tall . I took 1 inch out of the upper bust and 2 more inches out of the lower length, mid-calf. I thought I would be happy with the longer length, not.
I made a size 8, the second smallest size. I pretty much take the smallest size in patterns but the narrow cut of the upper bust on this put me a size up. Next time I will go 2 sizes larger or better yet, just put a zipper up the center back seam. This jumper is nearly impossible to get into and I have VERY narrow shoulders and torso. It spreads out quite comfortably once you leave the bust location.
Fabric:
I used a dark wash denim, 10 0Z. but I have no clue where I got it. I know it was online but not sure from where or when. This has now taught me to track where I purchase fabric on my yardage stickers that I put on all my fabrics now. I prewashed the fabric on hot twice. After construction, I washed it one more time before the first wearing. All was fine. After wearing it twice, I noticed the area at my waist in front was crocking fabric dye. I don't know where it went exactly but the lines match up perfectly with my kitchen sink/counter and my cutting table in the sewing room. Rub, rub, and the color is gone. I washed it again with color catchers, and the color disappearing continues. Could I dye it? I don't even want to think about that.
The fabric is 100% cotton and no stretch.
Construction:
I'll start at the top of my garment and work my way down.
Staps: You are instructed to fold to the center and then fold upon itself to make the straps. This makes one thick denim strap. I chose to sew mine wrong sides out on the edge, then turn with my tube, put the seam in the center and topstitch the edges, a lot less bulk.
I was really puzzled. I had to go back to the website to make sure my aging brain wasn't seeing things. Were the straps on backwards? The hardware was placed in the back. Every pair of OshKosh Bgosh coveralls my kids wore had the buckles in the front. Why were the buckles placed on my back where I couldn't easily adjust or see them? This was crazy and I deeply regret following the pattern directions here. Given the tight discomfort level of the upper bust in front, those straps belong there never mind the odd look of them in back. Is it me?
Third strap issue is that they have you place the straps about a half inch in from the corner oc the bib in front. With all the weight of the garment this had you with dogears in no time and it looked sad. I literally took them out of their topstitched home and moved them over to the corner of the bib. I recommend putting them there to begin with.
Bust Area:
This is snug. Do a muslin and make sure you have room to breath and carry the weight of the garment comfortably. Maybe go up a couple sizes from your measured suggestion. I would .
The darts are a bit high and I will lower them next time. It's hard to determine where they should go when adjustable straps are involved. However, this snug fitting garment is doubtfully being adjusted down.
Hems and Vents:
Here you can see how the vents are intentionally offset. You can also see how they are not mitered. This is a matter of the order of construction. It could have easily been mitered with a slight change in that order.
The deep vents emphasize the length of the garment. I originally took 2 inches off the length. I can easily see myself taking off 5 more.
All of the seams were pretty much stitched, then serged, then topstitched. This pattern comes with deep pockets that also get topstitching but I did not add them. I almost always eliminate pockets, result of a lifetime of wide hips.
So what do I do now? You all know how persistent I am.
The stain: I thought I could insert a sash in the triangle seams that would tie in the front, sort of like this:

Really nice score on the eyelet fabric. I can't wait to see what you do with it. As to the denim jumper I agree with you on the strap hardware. As to the wear pattern on the front you could 1. just cut the top off and refashion the garment into a skirt or 2. cover it with a kangaroo pocket. I also don't think it makes it unwearable. So many wear jeans with that done on purpose. Looking forward to see what you do. Jean
ReplyDeleteHappy new year! Thank you for reviewing the Ray Pinafore from Paper Theory Patterns. I have been looking for a pinafore myself.
ReplyDeleteThe fabric might be fading (the third photo seems to show a light fading where the straps are attached and the bust darts). A large belly pocket in a more color-safe blue denim (or completely different color) might help.
I agree with you that the straps become easier to manage if the D-rings and bag sliders are moved to the front. It would possibly be easier to get in-and-out of the garment with a side zip than a back zip, but I am unsure if the triangles under the arms make it difficult to insert a side zipper.
The side triangles would make a side zip problematic but thanks for the idea. There is a center back seam I could make work fairly easily. Two votes for the pocket!
DeleteThose are two great ideas, Jean, that I hadn't thought of. Thank you so much.
ReplyDeleteBunny what a wonderful score! I had my hand on a some eyelet (we call it broderie anglaise) in my stash yesterday and decided it needed to be aged for another year, but mmm, maybe this is a sign! Ye the back strap adjustment is odd, my only thought is they were trying to make the pattern different from all the other pinafore patterns and chose this rather arbitrary change. It annoys me on bras too that the adjusters are at the back. Have you considered adding a wedge to the underarm-waist sideseam? Give it a bit more bust room?
ReplyDeleteI've been playing with that idea as well. Lots to remake here but I think in the end I could have a very useful garment with years of potential.
DeleteBunny, even though things didn’t go as planned, I absolutely loved your post! The pinafore dress is one of my all-time favourites, and I dream of making one myself someday. Wishing you and your husband all the best with your plans. Here’s to an amazing 2026 ahead!
ReplyDeleteThanks, Lara. I love pinafores as well and one of denim could be so versatile. A great year for you and yours as well!
ReplyDeleteHappy New Year, Bunny, from Lindsay in California. I thought of the kangaroo pocket, too, maybe in patchwork? But make sure you are comfortable in the pinafore first.
ReplyDeleteDefinitely. I've already ordered some Chicago screws to put on the corners of the pockets to match the strap hardware. I've done a lot of image searching on pockets for this type of garment. There are lots of interesting options. Just in case you are not a bag maker, Chicago screws are a wonderful screw option to replace rivets. I prefer them over the rivets .
Delete